Mounting Solutions for Architectural Mesh: Special Shapes

Mounting Solutions for Architectural Mesh: Special Shapes

Wherever the cladded surface is not rectangular, wire cloth elements can be adjusted according to the desired geometry.

Angular Sides

Angular Sides
Angular Sides
Tension mechanism: Angular Sides
Tension mechanism: Angular Sides

The tension mechanism will be adjusted so that angular sides could be bordered and tensioned accordingly.

Curved Sides

Mounting Solutions: Curved Sides
Mounting Solutions: Curved Sides
Curved Sides with Architectural Mesh
Curved Sides with Architectural Mesh

Curved sides can be realized with an accordingly adapted tensioning solution.

Rounded Elements

Mounting of rounded wire mesh elements
Mounting of rounded wire mesh elements
Rounded mesh elements
Rounded mesh elements

Wherever our wire mesh elements cannot be utilized as flat pieces, pre-rounded elements can be used.

Cut-outs

Architectural mesh cut-outs at facades
Architectural mesh cut-outs at facades
Architectural mesh cut-outs
Architectural mesh cut-outs
Architectural mesh cut-outs
Architectural mesh cut-outs
Architectural mesh cut-outs for door openings
Architectural mesh cut-outs for door openings

Cut-outs can be made for doors or other openings. Depending on the position and size a bordering of the notches might be necessary to ensure a uniform tension of the mesh.

Top